NZ$ 22.01
Drive Axle Shoulder – N90587602
Secures the axle assembly to the hub
Sizing: 20×1.5
Install new hardware with your new or repaired parts. This drive axle nut secures the drive axle to the hub and wheel bearing on the outer end of the axle. Recommended to be replaced any time it is removed. Nut size is 20×1.5. 30mm 12-point socket required.
| Make | Model | Submodel | Engine |
|---|---|---|---|
| Audi | TT MKI | FWD | 180HP |
| Audi | TT MKI | Quattro | 180HP |
| Audi | TT MKI | Quattro | 225HP |
| Audi | TT MKI | Quattro | 3.2L |
| Volkswagen | Corrado | All | VR6 12v |
| Volkswagen | Golf III | All | VR6 12v |
| Volkswagen | Golf IV | All | 1.8T |
| Volkswagen | Golf IV | All | 2.0 |
| Volkswagen | Golf IV | All | TDI |
| Volkswagen | Golf IV | All | VR6 12v |
| Volkswagen | Golf IV | All | VR6 24v |
| Volkswagen | Jetta III | All | VR6 12v |
| Volkswagen | Jetta IV | All | 1.8T |
| Volkswagen | Jetta IV | All | 2.0 |
| Volkswagen | Jetta IV | All | TDI |
| Volkswagen | Jetta IV | All | VR6 12v |
| Volkswagen | Jetta IV | All | VR6 24v |
| Volkswagen | New Beetle | All | 1.8T |
| Volkswagen | New Beetle | All | 2.0 |
| Volkswagen | New Beetle | All | 2.5L |
| Volkswagen | New Beetle | All | TDI |
| Volkswagen | Passat B3 | All | VR6 12v |
| Volkswagen | Passat B4 | All | VR6 12v |
| Volkswagen | R32 MKIV | All | 3.2 |
| Type | Water Cooled |
|---|
220 Station Road, Penrose, Auckland, New Zealand (Parts and Service)
210 B Hazeldean Rd, Sydenham, Christchurch (Parts)
